|
|
Products
Apologies there's no online ordering at present, please contact via the link above.
Product is made-to-order but will usually be ready for dispatch within a week.
Unless otherwise requested, all PMA Tx and Rx are supplied configured for 868MHz for use in the EU.
Categories:
Rx - Receiver
Tx - Transmitter
CS - DCC Command Station
TH - Throttle
| Cat. | ID | Description | Photo | Price |
|---|
| Rx | 3.6A | Standard 3.6A receiver | 📸 | £40.00 | | | Can be used for the biggest Heljan 0 gauge diesels but compact enough for some of the smaller locos such as the Dapol 08 and Pannier.
| | Rx | 3.6Aw | Wired 3.6A receiver | 📸 | £40.00 | | | This version has the receiver and motor driver part connected by wires to enable more flexible placement around the loco. The wires only carry control signals so are very thin and flexible. Specify wire length when ordering.
| | Rx | 1.7A | Small 1.7A receiver | 📸 | £50.00 | | | A very small receiver for tight spaces. Has been used in 00 and even N gauge. Available in two formats; one long and thin, the other short and...not so thin. See the photo for measurements.
| | Rx | 13A | High Power 13A Receiver | 📸 | £56.00 | | | For when you need more than the 3.6A from the standard receiver, such as for large gauge 1 or G locos. Or maybe USA F-A and B units for example when you have 4 or more motors driven by one or two XL decoders.
| | Tx | CNV | DCC Convertor | 📸 | £40.00 | | | Connected to the track output of ANY DCC command station to send all DCC instructions via radio to all PMA receivers in range. It has a small LED screen that displays the DCC address of the loco currently under control.
| | Tx | CNV-C | DCC Convertor (Compact) | 📸 | £35.00 | | | Works as the standard DCC-CNV exept it doesn't have a status display. It can be supplied with either wires or a plug suited to the output socket of most DCC command stations.
| | CS | WCS | WiFi Command Station | 📸 | £60.00 | | | PMA Wifi Command Station is a complete DCC system, based around the open-source DCC-EX project. However, instead of a track output it has an integrated PMA Tx, all in a small box. You can connect up to 5 WiFi throttles to it to control the PMA-equipped locos. This includes throttles such as the TCS UWT series plus apps such as Engine Driver for Android and WiThrottle for iOS.
It can be powered from:- USB (either a mains charger or one of those portable phone charger batteries).
- Fixed 'accessory' AC or DC output of a DC controller.
- Track output of another DCC Command Station. (In which case you can also use the controllers of this other command station to control any PMA locos.)
It really is an amazing little 'box of tricks'.
| | CS | WCS-SC | WiFi Command Station (Self-Contained) | | £85.00 | | | (Coming Soon) This is a PMA WCS as above but with its own integrated USB-rechargeable battery, making it ideal to take out into the garden or to your club layout. The battery has enough capacity to last an entire day, and takes about 3.5 hours to charge from any USB charger. It's still housed in the same, small box too.
| | TH | Wi-TH | WiFi Throttle | | TBA | | | (Coming soon) A wifi throttle/controller with real buttons and display which will connect to WiThrottle servers such as the PMA-WCS, JMRI or receivers that run their own WiThrottle server such as WiFiTrax. This will suit people that, like me, prefer not to use a touch-screen like a phone or tablet as a controller. You can feel the real buttons and throttle dial and not have to continuously look at your screen to check you're touching the right on-screen button!
|
|
Product page last modified: GMT 3:31pm Thursday 9th January 2025 |
